DD Power Tools
Camberley Depot 01276 31132
Shepperton Depot 01932 227998
147 items are stocked by DD Power Tools
Trend
TREND 06053 COLLET CONE 1/4 (06053)
TREND 06053 COLLET CONE 1/4 (06053)            Replacement collet. Does not include the collet nut. Suitable for the following:- Makita 3700B, 3703, 3705 Dimensions: D=10mm d=1/4 inch Product Code: 06053

£7.19 Inc VAT | View
TREND 06748 COLLET 1/2 FOR 3612BR
TREND 06748 COLLET 1/2 FOR 3612BR              Replacement collet. Does not include the collet nut. Suitable for the following:- Makita 3600B, 3601B, 3612BR, 3612C & 3612. Dimensions: D=1/2 inch d=1/2 inch Product Code: 06748

£45.13 Inc VAT | View
TREND 06864 COLLET FOR MAKITA 8MM
TREND 06864 COLLET FOR MAKITA 8MM              Replacement collet. Does not include the collet nut. Suitable for following:- Makita 3620 (M362) Dimensions: d=8 mm D=1/2 inch Makita 3620 (M362) Product Code: 06864

£6.54 Inc VAT | View
TREND 10/10X1/2TC CHAMFER V GROOVE A=45 X 32MM DIA
TREND 10/10X1/2TC CHAMFER V GROOVE A=45 X 32MM DIA  Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board. Dimensions: D=32 mm C=15 mm C2=22 mm A=45 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 32 Cut Length Metric: 15 Product Code: 10/10X1/2TC

£56.37 Inc VAT | View
TREND 10/11X1/2TC CHAMFER V GROOVE A=45 X 38MM DIA
TREND 10/11X1/2TC CHAMFER V GROOVE A=45 X 38MM DIA  Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board. Dimensions: D=38 mm C=19 mm C2=26.5 mm A=45 degrees OL=68 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 38 Cut Length Product Code: 10/11X1/2TC

£53.61 Inc VAT | View
TREND 10/12X1/2TC CHAMFER V GROOVE A=45 X 51MM DIA
TREND 10/12X1/2TC CHAMFER V GROOVE A=45 X 51MM DIA  Use for bevelling, chamfering and for producing mortar grooves. Approx. 1.0mm flat will be found on nose. Ref. 11/3 is ideal for imitating 'V' jointed tongue and groove on man-made board. Dimensions: D=51 mm C=25 mm C2=35 mm A=45 degrees OL=82 mm Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 51 Cut Length Me Product Code: 10/12X1/2TC

£108.15 Inc VAT | View
TREND 10/1X1/2TC MORTAR GROOVE/LARGE CHAM A=45
TREND 10/1X1/2TC MORTAR GROOVE/LARGE CHAM A=45     Use for producing mortar grooves and for bevelling applications. Dimensions: D=41 mm C=22.5 mm C2=23 mm A=45 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 41 Cut Length Metric: 22.5 Angle: 45 Product Code: 10/1X1/2TC

£57.00 Inc VAT | View
TREND 10/20X1/2TC MITRE CORNER A=135 X 51.3MM DIA
TREND 10/20X1/2TC MITRE CORNER A=135 X 51.3MM DIA   This cutter makes a lapped mitre joint in timbers. Cutters ref.10/20X1/2TC and 10/21X1/2TC are used together to create the lapped mitre joint. Dimensions: D=51.3 mm D2=10 mm C=23 mm A=45 degrees Shank Diameter=1/2 inch Timber thickness min.=15 mm Timber thickness max.=18 mm Shank Diameter: 1/2 Diameter Metric: 51.3 Diameter 2 Me Product Code: 10/20X1/2TC

£120.30 Inc VAT | View
TREND 10/21X1/2TC MITRE CORNER A=45 X 35MM DIA
TREND 10/21X1/2TC MITRE CORNER A=45 X 35MM DIA      This cutter makes a lapped mitre joint in timbers. Cutters ref.10/20X1/2TC and 10/21X1/2TC are used together to create the lapped mitre joint. Dimensions: D=35 mm D2=15 mm C=25 mm A=45 degrees Shank Diameter=1/2 inch Timber thickness min.=15 mm Timber thickness max.=18 mm Shank Diameter: 1/2 Diameter Metric: 35 Diameter 2 Metric Product Code: 10/21X1/2TC

£104.36 Inc VAT | View
TREND 10/22X1/2TC BEVEL 24MM DIA X 25MM CUT
TREND 10/22X1/2TC BEVEL 24MM DIA X 25MM CUT          Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Dimensions: D=24 mm C=25 mm A=75 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 24 Cut Length Metric: 25 Angle: 75 Product Code: 10/22X1/2TC

£59.12 Inc VAT | View
TREND 10/22X12MMTC BEVEL 24MM DIA X 25MM CUT
TREND 10/22X12MMTC BEVEL 24MM DIA X 25MM CUT          Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Dimensions: D=24 mm C=25 mm A=75 degrees Shank Diameter=12 mm Shank Diameter: 12 mm Diameter Metric: 24 Cut Length Metric: 25 Angle: 75 Product Code: 10/22X12MMTC

£59.12 Inc VAT | View
TREND 10/23X3/8TC BEVEL 23M DIA X 25MM CUT
TREND 10/23X3/8TC BEVEL 23M  DIA X 25MM CUT          Especially designed bevel cutter for routing Corian, which is used in many bathrooms and kitchens. Dimensions: D=23 mm C=25 mm A=105 degrees Shank Diameter=3/8 inch Shank Diameter: 3/8 Diameter Metric: 23 Cut Length Metric: 25 Angle: 105 Product Code: 10/23X3/8TC

£78.33 Inc VAT | View
TREND 10/25X1/2TC TAPERED 12.7MM DIA X 32MM CUT
TREND 10/25X1/2TC TAPERED 12.7MM DIA X 32MM CUT      Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Dimensions: D=12.7 mm C=32 mm OL=80 mm A=87 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 12.7 Cut Length Metric: 32 Overall Length Metric: 8 Product Code: 10/25X1/2TC

£46.71 Inc VAT | View
TREND 10/26X1/2TC TAPERED 16MM DIA X 63MM CUT
TREND 10/26X1/2TC TAPERED 16MM DIA X 63MM CUT        Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Can be used for producing a leading edge on a door. Dimensions: D=16 mm C=63 mm OL=110 mm A=87 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 16 Product Code: 10/26X1/2TC

£81.10 Inc VAT | View
TREND 10/2X1/2TC MORTAR GROOVE/LARGE CHAM A=60
TREND 10/2X1/2TC MORTAR GROOVE/LARGE CHAM A=60     Use for producing mortar grooves and for bevelling applications. Dimensions: D=38 mm C=27 mm C2=25.5 mm A=60 degrees Shank Diameter=1/2 inch Shank Diameter: 1/2 Diameter Metric: 38 Cut Length Metric: 27 Angle: 60 Product Code: 10/2X1/2TC

£61.86 Inc VAT | View
TREND 10/30X1/2TC DRAWER LOCK 25.4MM DIA X 12.7MM CUT
TREND 10/30X1/2TC DRAWER LOCK 25.4MM DIA X 12.7MM CUT To increase gluing area producing a strong joint in drawer production. Dimensions: D=25.4 mm C=12.7 mm Shank Diameter=1/2 inch Timber thickness min.=15 mm Timber thickness max.=25 mm Shank Diameter: 1/2 Diameter Metric: 25.4 Cut Length Metric: 12.7 Product Code: 10/30X1/2TC

£40.54 Inc VAT | View
TREND 10/97X1/4TC MITRELOCK CUTTER X 38.1MM DIA
TREND 10/97X1/4TC MITRELOCK CUTTER X 38.1MM DIA      Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together. Ideal for speaker cabinets and drawer con Product Code: 10/97X1/4TC

£108.15 Inc VAT | View
TREND 10/99X1/2TC MITRE LOCK JOINTER A=45
TREND 10/99X1/2TC MITRE LOCK JOINTER A=45           Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together. Ideal for speaker cabinets and drawer const Product Code: 10/99X1/2TC

£120.30 Inc VAT | View
TREND 1004/10TC LIP & SPUR TWO WING BIT 10MM DIA
TREND 1004/10TC LIP & SPUR TWO WING BIT 10MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/10TC

£26.82 Inc VAT | View
TREND 1004/12TC LIP & SPUR TWO WING BIT 12MM DIA
TREND 1004/12TC LIP & SPUR TWO WING BIT 12MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/12TC

£27.46 Inc VAT | View
TREND 1004/13TC LIP & SPUR TWO WING BIT 13MM DIA
TREND 1004/13TC LIP & SPUR TWO WING BIT 13MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/13TC

£40.54 Inc VAT | View
TREND 1004/15TC LIP & SPUR TWO WING BIT 15MM DIA
TREND 1004/15TC LIP & SPUR TWO WING BIT 15MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/15TC

£40.54 Inc VAT | View
TREND 1004/16TC LIP & SPUR TWO WING BIT 16MM DIA
TREND 1004/16TC LIP & SPUR TWO WING BIT 16MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/16TC

£41.99 Inc VAT | View
TREND 1004/17TC LIP & SPUR TWO WING BIT 17MM DIA
TREND 1004/17TC LIP & SPUR TWO WING BIT 17MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/17TC

£41.99 Inc VAT | View
TREND 1004/18TC LIP & SPUR TWO WING BIT 18MM DIA
TREND 1004/18TC LIP & SPUR TWO WING BIT 18MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/18TC

£41.99 Inc VAT | View
TREND 1004/19TC LIP & SPUR TWO WING BIT 19MM DIA
TREND 1004/19TC LIP & SPUR TWO WING BIT 19MM DIA   These machine bits have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribe gives a very clean entrance hole. Not for use on hard dense materials such as laminate covered board, phenolic Tufnol, Wareite and GRP. For such materials, choo Product Code: 1004/19TC

£41.99 Inc VAT | View

Next Page
[1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31][32][33][34][35][36][37][38][39][40][41][42][43][44][45][46][47][48][49][50][51][52][53][54][55][56][57][58][59][60][61][62][63][64][65][66][67][68][69][70][71][72][73][74][75][76][77][78][79][80][81][82][83][84][85][86][87][88][89][90][91][92][93][94][95][96][97][98][99][100][101][102][103][104][105][106][107][108][109][110][111][112][113][114][115][116][117][118][119][120][121][122][123][124][125][126][127][128][129][130][131][132][133][134][135][136][137][138][139][140][141][142][143][144][145][146][147][148][149][150][151][152][153][154][155][156][157][158][159][160][161][162][163][164][165][166][167][168][169][170][171][172][173][174][175][176][177][178][179][180][181][182][183][184][185][186][187][188][189][190][191]

 

Camberley Depot & Showroom

67 London Road, Blackwater
Camberley, Surrey, GU17 0AB

Tel: 01276 31132
Email: sales@ddhire.co.uk


Opening Times
Monday - Friday | 7.30am - 5.30pm
Saturday | 8.00am - 12.30pm


Visit our Camberley Depot page here


Shepperton Depot & Showroom

201-203 Laleham Road
Shepperton, Middlesex, TW17 0AH

Tel: 01932 227 998
Email: sales@ddhire.co.uk


Opening Times
Monday - Friday | 7.30am - 5.00pm

Visit our Shepperton Depot page here



We Accept Visa, Mastercard,Maestro,Solo,Visa Electron and Delta.
DD Power Tools Saturday 21st October 2017
Powered By TABS For Tools
Terms & Conditions | Privacy Policy | Sitemap